top of page

How to Choose Display Stands for Your Shop (and When to Go Custom)

Nov 10
3 min read

A good display stand is easy to ignore. It holds the product at the right height, doesn’t shift when a customer reaches for something, and still looks fine at the end of a busy Saturday. A bad one does the opposite. It wobbles, the shelves sag, or it turns out to be 200 mm too wide for the aisle.


Most of those problems are decided before anything gets built. Here’s what to work out first.



Start with the product, not the stand


Weigh it, measure it, and think about how customers pick it up. A stand for light boxed items has very different needs from one holding bottles, tools or hardware. Three things matter most:


  • Weight per shelf or hook. Ask what load the stand is built for, and leave some margin.

  • Footprint and height. Eye level sells. The bottom shelf rarely does.

  • How it’s handled. Items that get picked up, put back and knocked need lips, rails or hooks that hold them.


Floor, counter or POS?


Floor display stands carry the range and shape how people walk through the shop. Counter and POS display stands sit near the till and hold small, low-cost add-ons. They’re small, but they’re handled all day, so a flimsy one shows quickly. Plenty of shops use both, so plan them together and keep the finish and colours consistent.


Pick the material for where it will sit


  • Powder-coated steel: strong, good value, and a sensible default for dry indoor retail.

  • Stainless steel: suits damp areas, food retail, pharmacies and anything that gets wiped down often.

  • Aluminium: lighter, so easier to move when you rearrange the floor.


If a stand will sit near an entrance, under a verandah or in a coastal spot, say so up front. Salt air is hard on bare or thinly coated steel.


Leave room to walk


The stand has to work with the aisle. Accessible routes are part of the New Zealand Building Code, and a tight aisle is a problem for wheelchairs, prams and trolleys whatever the rules say. Check clear widths with your fit-out designer or council before you lock in dimensions. building.govt.nz explains the access requirements.


Off the shelf or made to order?


Off the shelf is fine when your product is standard and the stand size is flexible. Made to order makes more sense when:


  • the product is an unusual shape or size

  • the space is awkward, like an alcove, a curved wall or a column

  • you want the stand in your brand colours

  • you need the same stand across several stores


If you’re searching for display stands for sale, ask three things: is it stock or made to order, what’s the lead time, and can it be modified later if your range changes?


Pro tip: Take a real product to the fabricator, not just a photo. Setting it on a mock-up shelf shows problems in five minutes that a drawing hides.


What to put in your brief


  • Product dimensions and weight, and how many go on each shelf

  • Where the stand will sit and how much floor space it can take

  • Quantity (one stand, or a run for multiple stores)

  • Finish and colour

  • Whether you need it delivered and installed


Our retail support team builds custom display stands and shelving to suit your store, and our metal fabrication team handles one-off pieces and production runs. If it needs fitting on site, that’s covered by installation and onsite.


Ready to plan yours? Send us your dimensions and a photo of the product and we’ll talk you through the options. Request a fabrication quote.


FAQs


How much does a custom display stand cost?

It depends on size, material, finish and how many you need. A single stand costs more per unit than a run of ten. Send us dimensions and a photo and we’ll price it properly.

 Yes. We do one-off pieces and production runs, so a rollout across multiple sites is fine.

For most dry indoor shops, powder-coated steel is strong and good value. Stainless is the better pick for damp, food or high-cleaning areas.

Yes, we can deliver and install. See our installation and onsite page.

In practice they’re used interchangeably. “Rack” usually suggests shelves or rails, while “stand” can mean any freestanding unit. What matters is what it needs to hold.


 
 
 

Comments


bottom of page